Today is the finale to my four-part series on the special Mother's Day present I created for my MIL, Nancy. I created six cards (two each of three card designs), and you can see the details of each of those cards in my previous posts: Embossed Vine, Shimmery Hummingbird and Embossed Stencil.
All of the cards fit nicely in a cute little stationery kit in the shape of a purse. I love to create purses! (Funny, that I only have one real-life purse that I've been carrying for four years!) So, without any further adieu...
Here is the front and the back of the purse. And, can you believe that I did not even CASE this one?! I used some basic techniques I had picked up in a Tote-Ally Awesome Tote tutorial by Becky Roberts at Inking in Idaho, but I started from scratch. So not like me, I know!
The inside of the purse holds three cards and envelopes on each side, and a decorated pen. Plus, the little pocket on the back of the purse holds postage for the six cards!
I had SO much fun making this set, and I'll admit it, I had a little trouble parting with it! There's something about a little organized set of cards (or anything that's organized, really) that makes me happy, happy, happy!
I used the Bella Bleu Designer Series Paper throughout the entire purse, and I used the chipboard backing in the package to create a more durable purse cover.
- Cut 2 chipboard pieces that are 5-1/2 x 7". To create the taper, I cut a diagonal line from the bottom 7" corner, in 1/2" to the 6-1/2" mark on the top. Do the same 1/2" diagonal cut on the opposite side. (click to enlarge the diagram)
- Cover each side of the chipboard with DSP. I used A LOT of SNAIL to adhere it, but I would highly recommend using a spray adhesive to avoid buckling in the paper when you emboss it. I added adhesive to the cut chipboard, then laid it on the paper and trimmed it. If you cut the paper out first, you run the risk of it not covering the chipboard properly.
- Once all sides are covered, you can use a Sanding Block on the edges to get rid of the excess paper.
I used a Sahara Sand Marker to color the white edges of my chipboard and sponged all edges of the paper with Sahara Sand ink. Then, I used the Mostly Vintage Stencils with VersaMark to clear emboss the designs on the front, and sponged the whole thing with Sahara Sand.Handles, Accents & Latch How-Tos
- Cut four pieces of 1 x 1-1/4" card stock for the handle accents (I used the retiring Bordering Blue). Trim the bottom corners of each with the Ticket Corner Punch, then adhere on the outsides of the purse cover, about 1/2" in from each edge.
- Cut two 12" pieces of 5/8" Grosgrain Ribbon. For a nice, unraveled edge, fold up each end of the ribbon about an inch and adhere it with SNAIL (fold in on the same side of the ribbon). Add more SNAIL to the folded edge and adhere each end to the insides of your cover, so they look centered against the accents. You could have the ribbons attach to the outside of your purse, for a different look.
- Use the Crop-A-Dile (it really is the only punch that will go through chipboard and ribbon) to punch a 1/4" hole for the eyelet in each accent. Be sure that your hole is centered over your accents, and that it catches the ribbon correctly to secure it. You may need to re-adjust your ribbon to make this line up properly.
- Attach an Antique Brass Jumbo Eyelet to each punched hole.
- Cut another piece of card stock for the latch: 2" wide and 4" long. Score the 4" side at 1-1/2" and 2-1/2". Use the Ticket Corner Punch on the end corners. Decorate your latch with paper or stamping.
- Add a Chocolate Chip Corduroy Button, or something similar, to the latch. You want to use something that goes through the card stock, like a brad of some sort (you don't want it coming off, do you?). The button I chose did not have prongs, so I punched holes with my Paper Piercer and tied it on with Natural Hemp Twine.
- Adhere the back panel of the latch onto the back cover of the purse. Use Sticky Strip for a secure hold.
- Use a Velcro Dot or a 1/2" Velcro Strip for the closure. They will line up correctly if you keep the Velcro together, attach one side to the latch. Then, peel off the paper liner of the other side of the Velcro, and close the latch to adhere the other side.
- Cut a piece of 6 x 4" card stock. Score at along the 6" side at 2" and 2-1/2".
- Cut a notch out of the end of the 2" panel with the Large Oval Punch. This will allow you to pull out the postage easily.
- Ticket Corner Punch the corners of the flap.
- Adhere the outside edges of the 2" panel with Sticky Strip.
- Decorate as desired. I used more Corduroy Buttons and Bella Bleu paper (I covered my brad prongs on the underside, so they don't show).
- Attach to the purse back with Stick Strip.
- Add Velcro to each side of the notch for the closure.
Inside Pockets How-Tos
- Cut a piece of 8 x 3-1/2" piece of card stock.
- Along the 8" side, score at 1/2", 1", 7" and 7/12".
- Along the 3-1/2" side, score at 1/2" and 1". (see dotted lines on diagram)
- Cut off the outside three squares on the corners as shown in the diagram. Then along the 3-1/2" sides, make a cut along the 1" score line up to where it intersects the other 1" score line. This makes a little flap on each side.
- Decorate your pocket with paper or stamping.
- Fold at all score lines and adhere the corners with SNAIL to create the pockets. The inside of the pocket should look like the next diagram.
- Add Sticky Strip to each of the edges BUT DON'T ADHERE IT TO THE COVER YET.
- Cut another piece of card stock: 1x6" and score along 1" side at the 1/2" mark. This will be the connector piece that brings the two sides together.
- Cover the outside panels of the "V" fold with Sticky Strip, without putting tape right on the fold (you want it to move). Attach the bottom of the pockets to this hinge (pockets should be front-to-front...the insides of your pockets, shown in the diagram, should be facing outward...you'll be attaching these to the sides).
- Attach one pocket to the inside cover, centering it along the bottom and keeping it flush with the bottom of the purse. Attach the other pocket to the other inside cover.
You're almost done now, but don't forget to add the decorated RSVP pen. I know you can find these at Office Depot and Wal-Mart, but they are probably also at Target, Meijer and Staples. Just make sure it is the RSVP brand.
- Unscrew the end of the pen and pull out the ink barrel.
- Add Sticky Strip along the long side of the paper, then attach along the barrel right below the end piece.
- Roll the paper around the barrel tightly, then insert into the pen and screw it back together.
To attach the pen to the purse...
- Cut three strips of the grosgrain ribbon, adhere them end-against-end with Sticky Strip. Make sure you wrap the ribbon around the pen as you adhere, and that you have enough room for the width of the cap to pass through.
- Attach them along the inside top of either side of the purse with Sticky Strip.
I hope you enjoyed this fun set! Looking at it now, I probably should have added a pretty flower to the front—that would have made it looked more finished. But, I think that Nancy really liked it, especially the pretty cards!